The term beamforming refers to a method of directing a wireless signal towards a specific receiving device, whereas the alternative would be allowing the signal to spread in all directions from a transmitter the way it naturally would.
By focusing a signal in a specific direction, beamforming delivers higher signal quality to a receiver. This means information is transmitted faster and more accurately. Furthermore, this accuracy can be reached without boosting broadcast power.
Example of Radiation Pattern with a Fixed Beamformer
Example of Radiation Pattern with an Adaptive Beamformer
An antenna array is comprised of multiple radiating elements, each of which contributes an element pattern to the array’s radiation pattern. Each element pattern is a spatial distribution of RF power arising from the amplitude and phase of the RF signal at the element’s RF feed point. The array’s radiation pattern is determined by the coherent sum of all element fields, each which may be “weighted” by an additional amplitude and phase. Such weighted patterns exemplify beamforming in the array, whereby sidelobe levels and nulls are produced and controlled by adjusting the element weights.
Beamforming techniques loosely fall into two categories: conventional and adaptive.
Fixed beamforming generally describes a conventional technique where the antenna array pattern is obtained from fixed element weights that do not depend on the signal environment. Conversely, adaptive beamforming element weights that do depend on —and can adapt to— the signal environment via some feedback mechanism.
Adaptive beamforming, which was initially developed in the 1960s, uses a digital signal processor (DSP) to compute the complex weights using an adaptive algorithm, which then generates an array factor for an optimal signal-to-interference-plus-noise ratio (SINR). Basically, adaptive beamformers are designed to adjust to differing situations in order to maximize or minimize SINR, which helps measure the quality of wireless communication.
The average civilian experiences adaptive beamforming technology in their every day life. In fact, wireless carriers use this technique to provide next-generation wireless communications (5G) and long-term evolution (LTE) services.
Latest Posts
An Introduction to RF Testing
RF testing is used to measure a variety of different antenna attributes. In this post, we discus a few ways in which rf testing can help determine if your device is performing the way it should.
Antenna 101: Types & Applications
In this article, we take a look at some of the different antenna types, and what applications they can be used for.
Why I Chose a Career in STEM
In celebration of STEM Day (November 8) we asked our CEO, Nancy Lilly, and our Director of Antenna Development, Victor Sanchez, why they decided to pursue a career in STEM, and this is what they said…